Kohler K-8807-CP Installation Guide download pdf (Page 3)

1. Install the Strainer

Apply a ring of plumbers putty or other sealant to the underside

edge of the drain body ﬂange or strainer body ﬂange.

Insert the drain or strainer body in the sink.

Assemble a gasket, plate, and nut to the drain body from under

the sink.

Wrench tighten.

NOTE: Do not reposition the drain after the locknut has been

tightened.

Align the wide end of the tailpiece with the drain or strainer

body, slide the nut onto the tailpiece, and thread the nut to the

drain or strainer body.

Position the trap on the end of the tailpiece.

If necessary, cut the tailpiece to ensure proper ﬁt.

Securely tighten the nut.

Insert strainer plate into strainer.

Strainer Plate

Body

Plumbers Putty

Gasket

Plate

Nut

Washer

Tailpiece

Nut

Kohler Co. 3 112446-2-BD

1 2 3 4 5 6 7 8 ... 11 12

No comments

Kohler K-8807-CP Installation Guide Page 3