Kohler K-R648-VS Installation Guide download pdf (Page 3)

1. Install the Faucet

Slide the O-ring up to the base of the spout, then ﬁt the faucet

through the drilled hole.

Partially thread two screws into the threaded ring until they

protrude slightly from the backside of the threaded ring.

IMPORTANT! Due to the asymmetrical design of the faucet, the

spout must be positioned with the Kohler logo facing away from the

user’s normal operating position.

Properly position the spout with the Kohler logo facing away

from the user’s normal operating position.

Rotate the spray wand to the intended position or to the user’s

preference.

Slide the metal washer onto the shank from the underside of the

sink.

Thread the threaded ring up the shank until it is about 1/4″ (6

mm) away from the underside of the sink. Ensure the screw holes

face the front and back of the faucet.

Tighten the screws.

IMPORTANT! The intended position of the spray wand is to face

the buttons away from the user’s normal operating position. This

position is adjustable to provide the user with additional ﬂexibility

to suit their personal preferences.

Spout

Threaded Ring

Screws

Shank

Metal Washer

O-Ring

Spray Wand

Kohler Co. 3 1048033-2-B

1 2 3 4 5 6 7 8 ... 27 28

No comments

Kohler K-R648-VS Installation Guide Page 3