Kohler K-R648-VS Installation Guide download pdf (Page 6)

4. Install the Supplies

CAUTION: Risk of restricted waterﬂow and product damage.

Use extreme care to avoid kinking and twisting the supply

hoses. Hoses must not be taut after installation.

NOTE: If the sink installation requires that you coil the supply hoses

to obtain a good connection, maintain an inside coil diameter of at

least 3″ (7.6 cm).

Carefully position the hot and cold water supplies so they will

not interfere with other hoses.

Connect the supply hoses to the supply stops. Left is hot, right is

cold.

Tighten all connections.

5. Flush the Supply Lines

Place the valve outlet hose into a bucket or suitable container.

Slowly turn on the hot and cold supplies.

Slowly turn the faucet handle to the full cold ON position.

Let the water run for one minute to remove any debris.

Rotate the faucet handle to the full hot position.

Let the water run for one minute to remove any debris.

Turn the faucet handle to the OFF position.

3" (7.6 cm)

or Larger

Cold

Hot

1048033-2-B 6 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

No comments

Kohler K-R648-VS Installation Guide Page 6