Kohler K-4918-0 Installation Guide download pdf (Page 3)

Roughing-In

•

Roughing-in dimensions are identical if using an optional 3″

outlet spud.

•

The urinal complies with ADA requirements when the rim is

mounted no higher than 17″ (43.2 cm) from the ﬁnished ﬂoor.

1. Prepare the Site

NOTE: If a pre-existing waste pipe will be used and will result in an

acceptable rim height (refer to the rough-in dimensions), follow the

retroﬁt installation instructions.

For Retroﬁt Installations

Turn the water supply line off, remove the existing urinal, then

cap off the water supply line inside the wall.

For New Installations

Install waste pipe as necessary to conform to the roughing-in

dimensions.

Install adequate support framing for the hangers as needed.

[

Floor

Wall

15-5/8" (39.7 cm)

14"

(35.6 cm)

6-3/4" (17.1 cm)

15" (38.1 cm)

24"

(61 cm)

16-1/8"

(41 cm) to

Center of

Hanger

Slots

29-5/8"

(75.2 cm)

20-3/16"

(51.3 cm)

18"

(45.7 cm)

2" NPT

Tap

(15.2 cm)

Wall Hangers

1/4"

(6 mm)

(15.2 cm)

2" NPT Tap

Spud Detail

Kohler Co. 3 1048745-2-D

1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments

Kohler K-4918-0 Installation Guide Page 3

Comments to this Manuals

Related products and manuals for Unknown Kohler K-4918-0