Kohler K-8003-BV Installation Guide download pdf (Page 4)

2. Install the Plaster Guard

Install the plaster guard. Push until the plaster guard is snug

against the face of the elbow (or tee).

3. Set the Pipe Depth

Thin Wall Installations

NOTE: Thin wall installations have a ﬁnished wall thickness of less

than 1/2″ (1.3 cm).

To adjust the pipe depth, use a level or other straight edge to line

up the ″Thin Wall Installation″ mark with the front face of the

studs.

Standard Wall Installations

To adjust the pipe depth, use a level or other straight edge to line

up the edge of the plaster guard with the front face of the studs.

All Installations

Install appropriate backing and strap the pipes at the adjusted

depth.

Elbow (or Tee)

Thin Wall

Standard Wall

Set Piping DepthInstall the Plaster Guard

Install the

plaster guard.

Align mark with the

front of the stud face.

Align mark with the

front of the stud face.

1043851-2-E 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 27 28

No comments

Kohler K-8003-BV Installation Guide Page 4