Kohler K-14572-FC-96 Installation Guide download pdf (Page 2)

Tools and Materials

Before You Begin

CAUTION: Risk of personal injury or product damage.

Handle with care. Product can break, chip, cause injury or

product damage if handled carelessly. Get help lifting the

sink.

Read these instructions carefully before you begin this

installation.

Observe all local plumbing and building codes.

Shut off the hot and cold water supplies.

Inspect the drain and supply tubing. Replace if necessary.

Prior to installation, unpack the new sink and inspect it for

damage. Return the sink to its protective carton until you are

ready to install it.

Due to the variety of installations possible with this sink, you

may need to use procedures other than those described. Because

of the variety of tiles available, you must take careful

measurements prior to installation.

It is very important that the proper materials are used with your

sink. Proper selection of tile is critical for a secure installation.

Because of the variance in tile thickness, your carpenter, tiler, and

plumber must be aware of the exact type of tile you choose.

After selecting the tile, provide a sample to each contractor

involved in the project. It is very important that the carpenter,

tiler, and plumber maintain communication and discuss the

requirements of the project.

Plus:

• 1/2" or larger drill bit

• Hole saw 1-3/8"

• Support frame members

• Sanding block

• Assorted sandpaper

• Orbital sander (optional)

Sealant

Drill

Pencil

Tape

Measure

Safety

Glasses

1019949-2-C 2 Kohler Co.

1 2 3 4 5 6 7 ... 35 36

No comments

Kohler K-14572-FC-96 Installation Guide Page 2