Kohler K-15072-P-0 Installation Guide download pdf (Page 6)

5. Water Temperature Adjustments

NOTE: Before adjusting the water temperature, ensure that the

handle is turned all the way to the left. This is the maximum hot

position.

Remove the plug button, O-ring, and screw from the handle.

Remove the handle and bonnet from the faucet body.

Lift the valve stem up and off the stop tab. The water will turn

on.

Align the stop tab with the mounting nut to establish the

maximum temperature.

Mark the maximum temperature on the mounting nut with a

marker or pencil.

Lift up the indexer and disk to clear the splines.

NOTE: Each spline notch represents approximately 9.5° F (5.3° C).

Turn the indexer, disk and valve stem counterclockwise, until the

temperature is properly adjusted.

Push down the indexer and disk to cover the splines after the

temperature is adjusted. Ensure that the disk is fully snapped into

the indexer.

Push the valve stem down onto the stop tab. The water will turn

off.

Reinstall the bonnet, handle, O-ring, screw, and plug button.

Screw

O-Ring

Plug Button

Valve Stem

Top Disc

Indexer

Splines

Handle

Bonnet

Stop Tab

Mounting Nut

1010460-2-B 6 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

No comments

Kohler K-15072-P-0 Installation Guide Page 6