Kohler K-19481-4-CP Installation Guide download pdf (Page 3)

1. Install the Faucet

Thread the mounting studs into the holes in the bottom of the

faucet body.

NOTE: The base of the faucet may be attached to the bidet using

either the supplied rubber washer or plumbers putty to form a

watertight seal. Do not attach the faucet to the bidet using both the

rubber washer and plumbers putty.

For rubber washer attachment: Slide the rubber washer over the

supply inlets and up to the faucet base.

For plumbers putty attachment: Apply plumbers putty or other

sealant to the underside of the ﬂange of the faucet base, as

shown. Refer to the putty manufacturer’s instructions for proper

application.

Feed the faucet supply inlets through the faucet hole of the bidet,

then properly position the faucet.

Slide the washer and bracket over the mounting studs, then

securely tighten the nuts to the mounting studs.

Nut

Washer

Bracket

Bidet

Mounting Stud

Supply Inlets

Apply

plumbers

putty.

Rubber

Washer

Kohler Co. 3 1050856-2-A

1 2 3 4 5 6 7 8 ... 23 24

No comments

Kohler K-19481-4-CP Installation Guide Page 3