Kohler K-2222-4-96 Installation Guide download pdf (Page 3)

1. Preparation

Install the water supplies and drain piping according to the

roughing-in information. Install the supply stops so the handles will

not touch the pedestal when fully open.

Install sufficient backing behind the ﬁnished wall to provide a secure

material for the anchoring devices.

Use lag bolts (not provided) to install the hanger to the wall

according to the roughing-in information. Make sure the hanger is

level, and is secured to the backing material behind the ﬁnished

wall.

Apply four self-adhesive gaskets (provided) to the top edge of the

pedestal as shown in “Install the Lavatory”.

Mark the centerline on the ﬂoor.

Refer to the roughing-in information, and position the pedestal on

the ﬂoor centerline location at the required distance from the

ﬁnished wall.

Carefully lift the lavatory into place on the hanger and pedestal, and

slowly move the pedestal as required to ensure proper ﬁt in the

desired location.

Kohler Co. 3 1016186-2-A

1 2 3 4 5 6 7 8 ... 15 16

No comments

Kohler K-2222-4-96 Installation Guide Page 3