Kohler K-T12021-4-CP Installation Guide download pdf (Page 4)

1. Install the Spout

CAUTION: Risk of internal seal damage. Do not use

petroleum-based lubricants when installing slip-ﬁt spouts. If the

spout will not slide over the tubing, use soapy water or a

silicone-based lubricant.

CAUTION: Risk of internal seal damage. Loosen the spout

setscrew with a 5/32″ hex wrench prior to installing the spout.

Slip-Fit Spouts

Remove the temporary nipple from the bath elbow.

Apply thread sealant and install a 1/2″ copper tube so it extends

1-1/2″ (3.8 cm) to 2-7/8″ (7.3 cm) beyond the ﬁnished wall.

Smooth the edge of the copper tubing.

Loosen the setscrew with a 5/32″ hex wrench.

Apply a bead of plumbers putty or other sealant around the inlet

end of the spout according to the manufacturer’s instructions.

Install the spout and carefully retighten the setscrew. Do not

overtighten the setscrew.

Remove all excess putty.

Threaded Spouts

Remove the temporary nipple from the bath elbow.

Setscrew

Copper Tube

Apply plumbers

putty.

1-1/2" (3.8 cm) –

2-7/8" (7.3 cm)

Slip-Fit Spouts

5/32" Hex Wrench

Nipple

Apply plumbers

putty.

3-7/8"

(9.8 cm)

Threaded Spouts

1031258-2-B 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 23 24

No comments

Kohler K-T12021-4-CP Installation Guide Page 4