Kohler K-1257-VBR-96 Installation Guide download pdf (Page 15)

9. Complete the Finished Walls

Cover the framing with water-resistant material.

Provide suitable access to the control ampliﬁer.

Tape and mud the wall materials. Install the ﬁnished wall. Seal the joints between the bath rim and

the ﬁnished wall material with silicone sealant.

Drill a 5/8″ (16 mm) hole through the wall material exactly where the user interface will be

installed. Refer to the ″Roughing-in - Required Components″ section to determine the user interface

installation location.

Route the user interface cable through the hole in the wall material, and tape or otherwise secure

the cable so it will not fall between the walls.

Install the faucet trim according to the faucet trim manufacturer’s instructions.

Concrete Construction

Apply mortar and tile to the wall and surround material as needed. Install tile to within 1/4″ (6

mm) of the bath deck, making sure the tile covers the screw heads in the ﬂange.

Apply a bead of silicone sealant where the tile meets the bath surface.

Install the faucet trim according to the trim manufacturer’s instructions.

Kohler Co. 15 1188012-2-C

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 59 60

No comments

Kohler K-1257-VBR-96 Installation Guide Page 15