Kohler K-1257-VBR-96 Installation Guide download pdf (Page 18)

Troubleshooting (cont.)

Troubleshooting Table

Symptom Probable Cause Recommended Action

D. The user interface cable

connections are loose or

damaged.

D. Inspect the cable for loose

connections or damage. Tighten the

connections or replace the cable as

needed.

E. The user interface does not

work.

E. Replace the user interface.

4. The user interface lights

up but does not work.

A. The control ampliﬁer must be

reset.

A. If the red LED on the control

ampliﬁer is not blinking, unplug the

control ampliﬁer for 30 seconds,

then plug in and restart.

B. The control ampliﬁer does not

work.

B. If the red LED on the control

ampliﬁer is still not blinking

following restart, replace the control

ampliﬁer.

C. The user interface cable

connections are loose or

damaged.

C. Inspect the cable for loose

connections or damage. Tighten the

connections or replace the cable as

needed.

D. The user interface does not

work.

D. Replace the user interface.

5. The auxiliary music does

not work.

A. Power to the control ampliﬁer is

not on.

A. Reset the circuit breaker to the

control ampliﬁer, then check the

electrical power supply and

connections.

B. The control ampliﬁer must be

reset.

B. If the red LED on the control

ampliﬁer is not blinking, unplug the

control ampliﬁer for 30 seconds,

then plug in and restart.

C. The control ampliﬁer does not

work.

C. If the red LED on the control

ampliﬁer is still not blinking

following restart, replace the control

ampliﬁer.

D. The auxiliary music source

option is not selected on the

user interface.

D. Select the auxiliary music option on

the user interface.

E. The vibracoustic sound is

muted on the user interface.

E. Touch the [Mute] icon on the user

interface to turn off the mute

setting.

F. The vibracoustic intensity is

turned down on the user

interface.

F. Turn up the vibracoustic intensity

on the user interface.

G. The auxiliary-in or user

interface cable connections are

loose or damaged.

G. Inspect the cables for loose

connections or damage. Tighten the

connections or replace the cables as

needed.

H. The user interface does not

work.

H. Replace the user interface.

(Optional) Chromatherapy Troubleshooting Table

Symptom Probable Cause Recommended Action

1. Chromatherapy lights do

not work.

A. Power to the control ampliﬁer is

off.

A. Reset the circuit breaker to the

control ampliﬁer, then check the

electrical power supply and

connections.

1188012-2-C 18 Kohler Co.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 59 60

Comments to this Manuals

No comments