Kohler K-2461-F2 Installation Guide download pdf (Page 2)

Thank You For Choosing Kohler Company

We appreciate your commitment to Kohler quality. Please take a few

minutes to review this manual before you start installation. If you

encounter any installation or performance problems, please don’t

hesitate to contact us. Our phone numbers and website are listed on

the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Before You Begin

CAUTION: Risk of product damage. Siliconized acrylic caulk must

be used to secure the lavatory to the vanity. Do not use 100%

silicone sealant, which will damage the ﬁnish of the vanity.

Observe all local building codes.

Prior to installation, unpack the new product and inspect it for

damage. Return the product to its protective carton until you are

ready to install it.

Make sure the ﬁnished wall is straight and plumb, and the ﬂoor

is ﬂat and perpendicular to the ﬁnished wall.

This vanity is designed to allow most base moldings to pass

behind the vanity. Remove any moldings that may inhibit the

vanity from being ﬂush against the ﬁnished wall.

It is recommended that the drawer be removed from the vanity

before beginning the vanity installation. Doing so will ease the

installation process. Refer to the section contained in this guide

for proper removal.

Pencil

Tape Measure

Siliconized

Acrylic Caulk

Safety Glasses

Drill Level

Assorted

Screwdrivers

• Wood Screws

• Framing Nails

• 3/4" Plywood

Plus:

1061218-2-A 2 Kohler Co.

1 2 3 4 5 6 7 ... 27 28

No comments

Kohler K-2461-F2 Installation Guide Page 2