Kohler K-9479-96 Installation Guide download pdf (Page 4)

1. Install the Plumbing

NOTE: Follow all local codes, standards, and regulations.

Locate rough plumbing for the drain according to the correct model’s roughing-in dimensions. Refer

to the roughing-in provided with this guide.

NOTE: If the plumbing will be located on an unﬁnished stud wall, install the supplies after the receptor is

installed.

Position the plumbing according to the roughing-in information.

Cap the supplies and check for leaks.

Install a 2″ (5.1 cm) drain pipe cut to extend 3/4″ (1.9 cm) to 1″ (2.5 cm) below the subﬂoor or slab.

A pocket is required in a slab construction to accommodate the drain ﬁtting.

Provide access to make drain connections to the receptor.

2-1/2" (6.4 cm)

Min

3/4" (1.9 cm) to

1" (2.5 cm)

Below Subfloor

2" (5.1 cm)

Drain Pipe

3/4" (1.9 cm) to

1" (2.5 cm)

Below Slab

2" (5.1 cm)

Drain Pipe

Receptor

9" (22.9 cm)

11" (27.9 cm)

Drain Cutout

Wood Subfloor

Wood Subfloor Concrete Subfloor

Receptor

Concrete Subfloor

9" (22.9 cm)

11" (27.9 cm)

Drain Cutout

1064933-2-B 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 23 24

No comments

Kohler K-9479-96 Installation Guide Page 4