Kohler COMMAND CH18-745 User Manual download pdf (Page 152)

8.35

Section 8

Electrical System and Components

Figure 8-62. Installing Thrust Washer.

10. Starter reassembly when replacing the Brushes/

Brush Holder Assembly:

a. Hold the starter assembly vertically on the end

housing, and carefully position the assembled

brush holder assembly, with the supplied

protective tube, against the end of the

commutator/armature. The mounting screw

holes in the metal clips must be “up/out.” Slide

the brush holder assembly down into place

around the commutator, and install the positive

(+) brush lead grommet in the cutout of the

frame. See Figure 8-63. The protective tube

may be saved and used for future servicing.

Figure 8-64. Removing Retaining Clips.

b. Position each of the brushes back in their slots

so they are flush with the I.D. of the brush

holder assembly. Insert the Brush Installation

Tool (SPX Part No. KO3226-1 with extension),

or use the tube described above from a prior

brush installation, through the brush holder

assembly, so the holes in the metal mounting

clips are “up/out.”

c. Install the brush springs and snap on the four

retainer caps. See Figure 8-65.

Figure 8-63. Installing Brush Holder Assembly with

Supplied Tube.

Starter reassembly when not replacing the Brushes/

Brush Holder Assembly:

a. Carefully unhook the retaining caps from over

each of the brush assemblies. Do not lose the

springs.

Figure 8-65. Brush Installation Tool with Extension.

d. Hold the starter assembly vertically on the end

housing, and carefully place the tool (with

extension) and assembled original brush holder

assembly onto the end of the armature shaft.

Slide the brush holder assembly down into

place around the commutator, install the

positive (+) brush lead grommet in the cutout of

the frame. See Figure 8-66.

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 217 218

Comments to this Manuals

No comments

Kohler COMMAND CH18-745 User Manual Page 152

Comments to this Manuals

Related products and manuals for For the car Kohler COMMAND CH18-745