Kohler COMMAND CH18-745 User Manual download pdf (Page 158)

9.5

Section 9

Disassembly

Figure 9-15. Removing Screws Holding Fuel Pump

(Metal Bodied Pump Shown).

4. Note or mark the orientation of the fuel pump,

then remove the fuel pump with lines attached as

shown in Figure 9-16.

Figure 9-16. Remove Fuel Pump and Lines.

Mechanical Fuel Pump

The mechanical style fuel pump is part of the valve

cover assembly. See Figure 9-17.

1. Disconnect the fuel lines at the pump outlet and at

the in-line fuel filter.

2. The fuel pump will be removed with the valve

cover. Refer to the valve cover removal

procedure.

Figure 9-18. Removing Control Bracket.

Figure 9-17. Mechanical Fuel Pump.

Remove Control Panel (If So Equipped)

1. Disconnect the Oil Sentry™ Indicator Light wires.

2. Disconnect the choke control cable from the

control bracket.

3. Disconnect the throttle control cable or shaft.

4. Remove the panel from the blower housing.

Remove Throttle & Choke Controls

1. Remove the four hex. flange screws securing the

control bracket and rear air cleaner bracket (some

models) to the cylinder heads. See Figures 9-18

and 9-19.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 217 218

No comments

Kohler COMMAND CH18-745 User Manual Page 158