Kohler COMMAND CH18-745 User Manual download pdf (Page 29)

4.2

Section 4

Air Cleaner and Air Intake System

3. Wash the precleaner in warm water with

detergent. Rinse the precleaner thoroughly until

all traces of detergent are eliminated. Squeeze

out excess water (do not wring). Allow the

precleaner to air dry.

4. Saturate the precleaner with new engine oil.

Squeeze out all excess oil.

5. Reinstall the precleaner over the paper air cleaner

element.

6. Reinstall the air cleaner cover. Secure the cover

with the two latches or the retaining knob.

Figure 4-6. Removing Elements.

Figure 4-7. Removing Rubber Seal from Bracket.

Paper Element Service (Standard Type)

Every 100 hours of operation (more often under

extremely dusty or dirty conditions), replace the paper

element. Follow these steps:

1. Unhook the latches or loosen the retaining knob,

and remove the cover.

2. Remove the wing nut, element cover, and paper

element with precleaner (if so equipped).

3. Remove the precleaner (if so equipped) from the

paper element. Service the precleaner as

described in "Precleaner Service".

4. Do not wash the paper element or use

pressurized air, as this will damage the element.

Replace a dirty, bent, or damaged element with a

genuine Kohler element. Handle new elements

carefully; do not use if the sealing surfaces are

bent or damaged.

Figure 4-4. Air Cleaner Components.

Element Cover

Wing Nut

Precleaner

Element

Figure 4-5. Removing Element Cover Wing Nut.

Seal

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 217 218

No comments

Kohler COMMAND CH18-745 User Manual Page 29