Kohler K-2804-P5-96 Installation Guide download pdf (Page 6)

1007278-2-A

Kohler Co., Kohler, WI, U.S.A.

Cut out the opening by carefully following the pencil line.

CAUTION: Risk of personal injury or product

damage. Large lavatories are very heavy. Get help

lifting the lavatory into place.

Temporarily position the lavatory in the countertop cutout

so the “Kohler” logo is visible. The logo is on the

underside, near the drain.

Remove the lavatory from the countertop cutout.

Fig. #15

Drill the faucet holes.

Install the faucet to the countertop according to the

manufacturer’s instructions.

Install the drain to the lavatory according to the drain

installation instructions.

Apply a bead of sealant around the countertop cut-out

hole. Apply the sealant approximately 1/4” (6mm) away

from the cut-out hole edge.

CAUTION: Risk of personal injury or product

damage. Large lavatories are very heavy. Get help

lifting the lavatory into place.

Note the location of the “Kohler” logo. The lavatory should

be installed so the logo is visible after installation.

Carefully position the lavatory in the countertop cutout.

Use care to avoid smearing the sealant bead. Wipe away

any excess sealant with a clean cloth.

Allow the sealant to cure for at least 30 minutes before

proceeding.

Fig. #16

Cutout Hole

Bead of Sealant

1/4”

(6mm)

Connect the faucet supply lines.

Connect the drain assembly.

Open the faucet valves, and check for leakage.

Clean up with a non-abrasive cleaner.

Fig. #17

Nut

Gasket

Nut

Gasket

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Comments to this Manuals

No comments

Kohler K-2804-P5-96 Installation Guide Page 6

Comments to this Manuals

Related products and manuals for Unknown Kohler K-2804-P5-96