Kohler K-10103 User Manual download pdf (Page 7)

5. Connect the Supplies

CAUTION: Risk of restricted waterﬂow and product damage.

Use extreme care to avoid kinking and twisting the supply

hoses. Hoses must not be taut when installed. If the supply

hoses must be coiled, maintain an inside coil of 3″ (7.8 cm).

CAUTION: Risk of product damage. Verify the solenoid

connector and sensor cable are not being pinched when

connecting the supplies.

IMPORTANT! To ensure proper performance of the faucet, the

supply lines must be ﬂushed out before proceeding with the

installation.

Turn on the main water supply.

Turn the supply stops to the ″ON″ position.

Flush water through the supply stops and into a bucket to

remove any debris.

Turn the supply stops to the ″OFF″ position.

Connect the supply hoses to the supply tees with supply stops.

IMPORTANT! Ensure the gasket is in place between the ﬂexible

hose and the outlet of the valve body assembly.

Connect the ﬂexible hose from the faucet to the outlet of the valve

body assembly.

Turn the supply stops to the ″ON″ position.

Flexible Hose

Gasket

Valve Body

Assembly

3/8" Supply Tees

with Supply Stops

Kohler Co. 7 1056542-2-B

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

No comments

Kohler K-10103 User Manual Page 7