Kohler K-99695-NA Installation Guide download pdf (Page 14)

Valve Settings (cont.)

To enable shower features, such as [Massage], go to the [Settings]

tab, then click on [System]. Safety instructions for each feature

must be read by the homeowner before it is enabled. Refer to

the guide for each feature.

Custom Shower Conﬁgurations

NOTE: Custom shower components will need to be selected

manually on the Web page valve menus.

To check or conﬁgure valve settings, go to the [Settings] tab, then

click on [Valve 1].

Select the settings for each shower outlet for your system

conﬁguration.

If applicable, click on [Valve 2] to select the outlets for the second

valve.

Complete the Installation

Once components have been conﬁgured, test for functionality.

Verify that each component is operating as intended.

For troubleshooting information for each system component, refer

to the guide found on the product page at www.us.kohler.com.

Troubleshooting

IMPORTANT! Turn off the power before performing any

maintenance.

NOTE: For service parts information, visit your product page at

www.kohler.com/serviceparts.

This troubleshooting guide is for general aid only. For service and

installation issues or concerns, call 1-800-4KOHLER.

Controller Troubleshooting Table

Symptoms Probable Cause Recommended Action

1. System stops

working and

the status LED

is solid red.

A. System failure. A. Reboot the controller

by disconnecting the

AC power from the

wall outlet. If the

status LED remains a

solid red after reboot,

replace the controller.

1218131-2-A 14 Kohler Co.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

No comments

Kohler K-99695-NA Installation Guide Page 14