Kohler K-101-PB Installation Guide download pdf (Page 15)

12. Six Prong Handle Installation

Verify that the valves are in the closed position.

NOTICE: Risk of product damage. Do not overtighten.

Overtightening will damage the handle.

Insert the stem screw into the stem extension and tighten with a

screwdriver.

Loosen the setscrew.

Position the handle assembly on the stem extension.

Verify that the handle label is in an even horizontal position. If

needed, remove the handle and adjust its position on the splines

of the stem extension until horizontal. For ﬁne adjustment, pull

out the stem extension until it disengages from the valve, rotate,

and return it to its original position. Do not pull the stem

extension completely out.

Tighten the setscrew.

Repeat for the other handle.

Open

Six Prong

Handle

Stem

Extension

Stem

Screw

Setscrew

Bonnet

Shown in Closed Position

Kohler Co. 15 1008209-2-G

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

No comments

Kohler K-101-PB Installation Guide Page 15