Kohler K-14037-G-96 Installation Guide download pdf (Page 3)

Product Information (cont.)

NOTICE: Keep the area around the blower motor clean and free of sawdust, insulation, dirt, or other

small loose debris. Such material could plug the blower motor air intake and reduce the air ﬂow through

the blower.

Connections and Service Access

Before installation, ensure proper access to the ﬁnal connections.

NOTICE: Provide generous, unrestricted service access to the blower. Before installation, ensure that

there is proper access to the blower motor and ﬁnal connections. If the blower motor is installed in an

enclosed area, an access panel is required at the blower motor. This panel should be 18″ (457 mm) wide

and 14″ (356 mm) high minimum.

Features

Factory assembled components include a blower motor, air harness, control, check valve, butterﬂy valves,

chromatherapy lights (certain models), electrical harnesses, and an illuminated user keypad. Other than

power wiring and plumbing connections, no assembly is required.

Tools and Materials

Before You Begin

Blower Information

NOTICE: Relocate the blower motor and check valve together. Do not relocate one without the other.

All material needed for the relocation of the blower motor must be supplied by the installer.

Additional tools and materials you will need to relocate the blower motor:

•

Electrician pliers

•

Assorted screwdrivers

•

Adjustable wrench

•

Drill and bits to install the blower mounting fasteners

•

18 AWG non-metallic sheathed cable, two conductors with ground, with support clips, as required

•

One 4″ (102 mm) x 2″ (51 mm) electrical junction box with cover, gasket, and mounting screws

Sealant

Plus:

• Conventional tools and materials

• Drop cloth

• Fasteners (as necessary)

• Rags

• Saw horses

• Hole saw

Kohler Co. 3 1220597-2-D

1 2 3 4 5 6 7 8 ... 59 60

No comments

Kohler K-14037-G-96 Installation Guide Page 3