Kohler K-14037-G-96 Installation Guide download pdf (Page 9)

5. Secure Two Foot Clips (Without Shroud)

Pull out the locking plates on the two foot clips that were traced on the ﬂoor and remove the foot

clips.

Position these foot clips on the traced lines and mark the four screw holes.

IMPORTANT! Make sure the foot clips will be ﬂush with the ﬁnished ﬂoor after installation. If you use

anchors that protrude above the ﬁnished ﬂoor, recess the ﬁnished ﬂoor material around the holes or recess

the anchors so the foot clips are ﬂat against the ﬁnished ﬂoor.

Carefully drill the four screw hole locations in the ﬁnished ﬂoor, and secure the foot clips to the

ﬂoor using fasteners suitable for the ﬂoor material.

Unlocked

Position

Finished Floor

Subfloor

Foot Clip

Kohler Co. 9 1220597-2-D

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

No comments

Kohler K-14037-G-96 Installation Guide Page 9