Kohler K-9026-96 Installation Guide download pdf (Page 2)

Thank You For Choosing Kohler Company

We appreciate your commitment to Kohler quality. Please take a few minutes to review this manual before

you start installation. If you encounter any installation or performance problems, please don’t hesitate to

Company.

Tools and Materials

Before You Begin

WARNING: Risk of personal injury. Cast iron shower receptors are extremely heavy. Wear

appropriate safety equipment when installing and get help lifting. Remove rings, wristwatch, and other

items that may accidentally scratch or damage the enamel surfaces during installation.

Observe all local plumbing and building codes.

Locate the rough plumbing for the drain in accordance with the roughing-in dimensions for your

particular model.

A variety of installations are possible. These instructions show suggested installation procedures,

your particular installation may require other construction techniques.

Please read these instructions carefully to familiarize yourself with the required tools, materials, and

installation sequences. Follow the sections that pertain to your particular installation. This will help

you to avoid costly mistakes.

Your shower receptor comes packaged in a single carton containing a one-piece shower receptor.

This carton will ﬁt through any standard door. You should not remove the receptor from the

package until you are ready to install it.

Unpack and inspect the shower receptor for damage. If you ﬁnd any damage, do not install the

receptor. Report the speciﬁc problem to your dealer immediately.

After inspection, return the receptor to the carton until you are ready to install it.

You must install this shower receptor to an adequately supported, level subﬂoor.

Be sure that you have enough access to move the receptor into the construction area.

Make sure the installation area is clean and free of all debris. If remodeling, remove all ﬁnished wall

material to expose the framing and remove all ﬂoor coverings to expose the subﬂoor.

Provide properly dimensioned framing.

Exact location of the end studs will depend on the thickness of the ﬁnished wall material.

Plus:

• Common Woodworking

Tools and Materials

• Nails/Drywall Screws

• Drop Cloth

• 2 x 4s or 2 x 6s

• Water Resistant Wall Material

• Furring Strips

Safety

Glasses

Tape

Measure

Pencil

Level

Pipe

Wrench

Sealant

Plumbers

Putty

Knife

Square

Screwdriver

1009404-2-D 2 Kohler Co.

1 2 3 4 5 6 7 ... 23 24

Comments to this Manuals

No comments

Kohler K-9026-96 Installation Guide Page 2

Comments to this Manuals

Related products and manuals for Unknown Kohler K-9026-96