Kohler K-6228-C12-VS Installation Guide download pdf (Page 4)

1. Prepare the Site

Install the Framing

IMPORTANT! The diagram illustrates hole locations for a right side handle. Reverse

the holes for installations with a left side handle.

NOTE: The mixer valve requires special framing and support.

Construct the framing for the faucet installation. A suggested framing example is

illustrated.

Verify the constructed framing is level and will be parallel to the ﬁnished wall.

Adjust as needed.

Attach the Mixer Valve

Loosely attach the mixer valve to the framing with one or two wood screws (not

provided).

Using the ﬂat portion of the mixer valve as a guide, level the mixer valve.

Fully tighten the wood screw(s).

Préparer le site

Installer le cadrage

IMPORTANT! Le diagramme illustre les emplacements des trous pour une poignée

sur le côté droit. Inverser les trous pour les installations avec une poignée sur le côté

gauche.

Ø 1-3/16" (30 mm)

1-3/4"

(44 mm)

1-1/2" (38 mm)

3-1/2" (89 mm)

These surfaces to

be flush.

Ces surfaces

doivent être égales.

Estas superficies

deben quedar al ras.

These surfaces to

be flush.

Ces surfaces

doivent être égales.

Estas superficies

deben quedar al ras.

1095311-2-H 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 27 28

No comments

Kohler K-6228-C12-VS Installation Guide Page 4