Kohler K-T10278-4A-G Installation Guide download pdf (Page 4)

1. Prepare the Site

Install or relocate the water supplies as needed.

Protect the surfaces of the bath/deck during installation.

Ensure that holes drilled into the deck are not oversized. The spout

and valves require adequate base material strength and maximum

contact area with the deck.

Plaster guard diameters are approximately 1–5/8” (4.1cm) for the

valves and 7/8” (2.2cm) for the spout.

NOTE: Reinforcing material may be required if the deck or rim is

thin. Install before proceeding.

NOTE: For installations to be covered with tile, the tile thickness

must not exceed 1–1/4” (3.2cm).

RIM OR DECK MOUNT

INSTALLATION

7" (17.8cm)

6-3/4"

(17.1cm)

1-1/8" D. (2.9cm)

2-13/16" D.

(7.1cm)

ROUGH + FINISHED

DECK MOUNT INSTALLATION

2-3/8" D. (6cm)

TRADITIONAL

2-3/8" D. (6cm)

SCULPTED

7/8" D.

(2.2cm)

3" (7.6cm) 2-7/8" (7.3cm)

4-11/16"

(11.9cm)

4-5/8"

(11.7cm)

2-1/8" (5.4cm) MAX.

ROUGH DECK

5" (12.7cm)

1/4" (6mm) TO

1-1/4" (3.2cm)

MAX. FINISHED

DECK

8" Min. (20.3CM)

5/8" O.D. (1.6cm)

SUPPLIED BY

INSTALLER

5/8" I.D.

(1.6cm)

1/4"

(6mm)

TO 2-1/8"

(5.4cm)

MAX.

RIM OR

DECK

MOUNT

1-13/16"

(4.6cm)

1-1/4"

(3.2cm)

3/4" (1.9cm)

I.D.

1017937-2-A 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 47 48

Comments to this Manuals

No comments

Kohler K-T10278-4A-G Installation Guide Page 4

Comments to this Manuals

Related products and manuals for Sanitary ware Kohler K-T10278-4A-G